EDGE METAL

If you're a commercial roofing contractor or sheet metal installer, you know that having the right edge system is essential to your success. That's why we offer a wide variety of edge systems designed specifically for your needs. From highly engineered and tested products to fast-turn convenience and economical pricing, we have the perfect solution for you.

Instinctive Metals is an Authorized Fabricator of ANSI/SPRI ES-1 UL Approved Edge Metal Products

Our most popular system; designed to simplify installation with efficient and fast application, maximizing profits and reducing costly labor, all while providing exceptional aesthetics. The Edge Fascia protects single-ply roofs against high wind events and driving rains, saving your building owner costly damage.

The complete system combines the value, engineering, and enhanced aesthetics that today’s demanding building owner’s expectations. Furnished with heavy 20 ga. or .050 Aluminum, 12” wide Anchor Chairs guaranteeing a quality, secure and lasting assembly.

Incorporates the same continuous 22 ga Steel or .040 Aluminum cleat for ease of installation and proper positioning and is pre-punched with fastener holes 12” o.c. on the face and 6” o.c. on the roof. The Gravel Stop System incorporates a standard 3” deep, 90° roof flange that easily accepts stripped-in membrane roofing products.

Incorporates the same continuous 22 ga Steel or .040 Aluminum cleat for ease of installation and proper positioning and is pre-punched with fastener holes 12” o.c. on the face and 6” o.c. on the roof. The Drip Edge System incorporates a standard 3” deep, 90° roof flange that easily accepts stripped-in membrane roofing products.

Product Offerings

Offered in a large variety of materials and colors.

  • Galvalume® (22 ga. & 24 ga.) – Colors To The Right
  • Aluminum (.050, .040 & .032) –Colors To The Right
  • Other Materials Available
    • Contact Instinctive Metals for verification of test report on your project.
Advantages
Accessories

Some Popular ES-1 Profiles are Below

ALL PROFILES ARE ​ANSI/SPRI ES-1 TESTED RESISTANCE

Coping

UL-1

OUTWARD: 190 LBS./SQ. FT & UPWARD: 310 LBS./SQ. FT.

Raised Perimeter Edge (Fascia Cap)

UL-20

170 LBS./SQ. FT

Embedded Edge (A-Type) Gravel Stop

UL-25A

210 LBS./SQ. FT

Embedded Edge (L-Type)

UL-32

125 LBS./SQ. FT

Face Extender

UL-34

210 LBS./SQ. FT

Snap-Lock Fascia

UL-44

130 LBS./SQ. FT

Our Equipment

We Can Cut The Following Metals And Thicknesses

  • 14 Gauge Steel And Thinner
  • 18 Gauge Stainless Steel And Thinner
  • .125" Aluminum And Thinner
  • 48 oz. Copper And Thinner
Spring steel fingers